Pengujian Black Box pada Aplikasi Berita Online dengan Menggunakan Metode Boundary Value Analysis

Ahmad Ijudin, Aries Saifudin

Abstract


Testing is one level that must be passed in order to produce results from a weighted system. If no testing is done on the system, the quality of the system cannot be known so that if an error occurs it can harm the system. By conducting experiments can find the location of defects in a system that can be known from the beginning that can be fixed immediately. Testing there are several types of system experiments, experiments used are black box testing using a limit value analysis method that is effective in trying the functions of a system. The technique determines the limits on the lower and upper values to produce the actual values. Based on the test results using the boundary value analysis technique that still has a disability that is the lack of data verification, then there must be an improvement in the validation function.

Keywords


Boundary Value Analysis; Online News; Black Box Testing

References


Agarwad, C. B. (2010). Software Engineering & Testing. Boston: Jones and Bartlett Publisher.

Andriansyah, D. (2018). Pengujian Kotak Hitam Boundary Value Analysis Pada Sistem Informasi Manajemen Konseling Tugas Akhir. Indonesian Journal on Networking and Security, 2354-6654.

Ardiansyah, H. (2017). Sistem Penunjang Keputusan Pemilihan Guru Terbaik dengan Metode TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) Studi Kasus: SDN Bendungan Hilir 01 Pagi Jakarta Pusat. Jurnal Informatika Universitas Pamulang, 89-96.

Fakhri, M. A., Aknuranda, I., & Pramono, D. (2018). Implementasi Sistem Informasi Showroom Mobil (SISMOB) dengan Pemrograman Berbasis Objek (Studi Kasus: UD. Tomaru Oto). Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 2967-2974.

Hidayat, T., & Muhammad, M. (2018). Pengujian Sistem Informasi Pendaftaran dan Pembayaran Wisuda Online menggunakan Black Box Testing dengan Metode Equivalence Partitioning dan Boundary Value Analysis. Jurnal Teknik Informatika UNIS, 25-29.

Jaya, T. (2018). Pengujian Aplikasi dengan Metode Blackbox Testing. J. Pengemb. IT, 45–48.

Jaya, T. S. (2018). Pengujian Aplikasi dengan Metode Blackbox Testing Boundary Value Analysis (Studi Kasus: Kantor Digital Politeknik Negeri Lampung). Jurnal Informatika: Jurnal Pengembangan IT (JPIT), 45-48.

Mustaqbal, M. S., Firdaus, R. F., & Rahmadi, H. (2015). Pengujian Aplikasi Menggunakan Black Box Testing Boundary Value Analysis (Studi Kasus Aplikasi Prediksi Kelulusan SNMPTN). Jurnal Ilmiah Teknologi Terapan (JITTER), 31-36.

Simarmata, J. (2010). Rekayasa Perangkat Lunak. Yogyakarta: Andi.

Sukamto, R. A., & Shalahuddin, M. (2013). Rekayasa Perangkat Lunak Terstruktur dan Berorientasi Objek. Bandung: Informatika.

Zuriati, Widyawati, D. K., Sitanggang, I. S., & Buowo, A. (2018). Teknik Pengujian Boundary Value Analysis pada Aplikasi Learning Management System Polinela. Jurnal TAM (Technology Acceptance Model), 85-92.




DOI: http://dx.doi.org/10.32493/informatika.v5i1.3717

Refbacks



Copyright (c) 2020 Ahamad Ijudin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Jurnal Informatika Universitas Pamulang (ISSN: 2541-1004 e-ISSN: 2622-4615)

Copyright © 2016-2020 Program Studi Teknik Informatika Universitas Pamulang. All rights reserved.



This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License