Studi Temperatur Penyimpanan Pada Proses Penimbunan B30 Guna Mengurangi Korosi
DOI:
https://doi.org/10.32493/jitk.v5i2.11468Keywords:
biodiesel, storage, storage time, temperature, corrosion testAbstract
Pressure Vessel is a vessel to contain both liquid and gasses. The storage tank is one of the tools to contain fluid, so it is an important factor in an industry such as chemistry, oil, and power plants. Biodiesel is an alternative fuel made from vegetable oil that is environmentally friendly and can reduce exhaust emissions in diesel engines. Biodiesel is renewable and reduces engine performance, so it can be used as a solution to overcome the reduced fossil fuel reserves. It is necessary to determine the corrosion rate of biodiesel. This research was conducted by storing biodiesel in the sample tank for 0 day, 1 day, and 4 days after that, the ASTM D-130 copper strip corrosion test was carried out for 3 hours ± 5 minutes. From the research, we know that corrosion rate at indoor had been stored for 4 days and for outdoor at day 0,1 and 4 gets greater corrosion with result 1b( dark orange).
References
. Apuke, Oberiri Destiny.2017.Quantitative Research Methods A Synopsis Approach.Departement of Mass Communication, Taraba State University, Jalingo, Nigeria
. Ebenezer, SKL.2015. Buku Minyak Bumi Dan Produk Migas.Palembang.Politeknik Akamigas Palembang.
. George E .Totten.2003. “Fuels and Lubricants Handbook : Technology, Properties, Performance, and Testingâ€.ASTM International. Glen Bumie
. Magga, Ramang, M. Zuchry, Arifin, Yusnaini., .2017. Analisis Laju Korosi Baja Karbon Rendah Dalam Media Bahan Bakar (Premium dan Pertalite), Prosiding Seminar Hasil Penelitian (SNP2M) 2017 (pp.223-228)
. Silviana dan Buchori, Luqman.2015. Efek Penyimpanan Biodiesel Berdasarkan Studi Kajian Degradasi Biodiesel CPO.Reaktor, Vol.15 No.3, April 2015, Hal. 148-153.
. Wibowo Setiyo.2012.Pengukuran Laju Korosi Baja Galvanis Premium dan Pertamax Dengan Metode American Standard Testing Dan Material D-130 di SPBU Pertamina Surabaya.Fakultas Teknologi Industri Universitas Pembangunan Nasional “Veteranâ€.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under creativecommons.org/licenses/by-sa/4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Ilmiah Teknik Kimia have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, Jurnal Ilmiah Teknik Kimia recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
Jurnal Ilmiah Teknik Kimia is licensed under a Creative Commons Attribution 4.0 International License
YOU ARE FREE TO:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
