Pengaruh Penambahan Filler Talc Terhadap Sifat Termal dan Massa Jenis Komposit Polipropilena/Masterbatch Black
DOI:
https://doi.org/10.32493/jitk.v6i2.19471Keywords:
Polypropylene, talc, masterbatch black, density, melt temperatureAbstract
Polypropylene/PP is one type of thermoplastic polymer that is widely used in everyday life. The use of fillers aims to reduce production costs and improve certain properties of the polymer matrix. This study aims to study the effect of adding talc as a filler on the physical and thermal properties of PP/masterbatch black (PP/MB Black) -based composites with percentages of 0, 5, 10, 15, and 20%. PP was mixed with 4% black MB Black and talc, then processed using injection molding. The composite product was then tested for thermal properties using Differential Scanning Colorimetry (DSC) and physical properties (density). The results showed that the addition of 20% of talc can increase the melting temperature with a melting temperature of 162.1°C and the lowest density of 0.908 g/cm3 without the addition of talc.
References
Ahmed, S. I., Shamey, R., Christie, R. M., & Mather, R. R. (2006). Comparison of the performance of selected powder and masterbatch pigments on mechanical properties of mass-colored polypropylene filaments. Coloration Technology, 122(5), 282–288. https://doi.org/10.1111/j.1478-4408.2006.00042.x
Ambrogi, V., Carfagna, C., Cerruti, P., & Marturano, V. (2017). Additives in Polymers. In Modification of Polymer Properties. Elsevier Inc. https://doi.org/10.1016/B978-0-323-44353-1.00004-X
Aryanti, F. I. (2021). Pembuatan Komposit Polimer Polipropilena/Talk/Masterbatch Hitam Pada Cover Tail. Jurnal Teknologi Dan Manajemen, 19(1), 1–6.
Aryanti, F. I., & Pasya, E. C. (2021). Purge material berbasis campuran recycled HDPE dan lempung kaolin untuk ekstrusi polipropilena dan masterbatch. Majalah Kulit, Karet, Dan Plastik, 37(1), 17–26.
Badri, M. G., Darsin, M., & Dwilaksana, D. (2014). SIFAT MEKANIK DAN CACAT PENYUSUTAN ( SHRINKAGE ) AKIBAT VARIASI KOMPOSISI CAMPURAN DAUR ULANG POLYETHYLENE PADA INJECTION MOULDING. Injection moulding is one process to form plastic by compress the melted plastic in a closed die . The raw material for the . 7(April).
Bouiadjra, B. A. B., Albedah, A., Bouziane, M. M., Bouakkaz, A. O., Benyahia, F., & Khan Mohamed, S. M. A. (2018). Effects of Voids Growth on the Damage of Polypropylene/Talc Micro-composite. Journal of Failure Analysis and Prevention, 18(5), 1111–1119. https://doi.org/10.1007/s11668-018-0496-3
Buasri, a, Chaiyut, N., Borvornchettanuwat, K., Chantanachai, N., & Thonglor, K. (2012). Thermal and Mechanical Properties of Modified CaCO 3 / PP Nanocomposites. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 6(8), 446–449.
Budiyantoro, C., Sosiati, H., Kamiel, B. P., & Fikri, M. L. S. (2018). The effect of CaCO3 filler component on mechanical properties of polypropylene. IOP Conference Series: Materials Science and Engineering, 432(1). https://doi.org/10.1088/1757-899X/432/1/012043
Soy, U., Findik, F., Yetgin, S. H., Gokkurt, T., & Yıldırım, F. (2017). Fabrication and Mechanical Properties of Glass Fiber/Talc/CaCO3 Filled Recycled PP Composites. American Journal of Applied Sciences, 14(9), 878–885. https://doi.org/10.3844/ajassp.2017.878.885
Yang, Z., Peng, H., Wang, W., & Liu, T. (2010). Crystallization behavior of poly(ε-caprolactone)/layered double hydroxide nanocomposites. Journal of Applied Polymer Science, 116(5), 2658–2667. https://doi.org/10.1002/app
ZsÃros, L., Török, D., & Kovács, J. G. (2017). The Effect of Masterbatch Recipes on the Homogenization Properties of Injection Molded Parts. International Journal of Polymer Science, 2017. https://doi.org/10.1155/2017/5745878
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under creativecommons.org/licenses/by-sa/4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Ilmiah Teknik Kimia have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, Jurnal Ilmiah Teknik Kimia recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
Jurnal Ilmiah Teknik Kimia is licensed under a Creative Commons Attribution 4.0 International License
YOU ARE FREE TO:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
