KAJIAN AWAL KATALIS HARGA RENDAH UNTUK PRODUKSI DIMETIL ETER SECARA LANGSUNG DARI SYNGAS BATUBARA
DOI:
https://doi.org/10.32493/jitk.v1i1.520Keywords:
Keywords, low rank coal, DME synthesis, low cost catalyst, low pressure fixed bed reactorAbstract
Coal utilization including its processing for an alternative energy is quite large in Indonesia and absolutely necessary. Especially on coal with low calorific value like lignite, at handling with direct combustion as in conventional coal power plant is an environmentally friendly manner because its emission contains harmful substances NOx and CO. Approching with clean coal technologies, gasification, emissions of harmful substances into the environment can be reduced. This gasification process, coal is converted into syngas which is an intermediate product that can be directed into various types of alternative fuels such as methanol. Development of efficient and low cost DME synthesis from syngas produced from gasification of coal has been our interest, in particular development of low cost catalyst which is shown by Low Pressure Fixed Bed Reactor. In this research scheme, we develop the catalyst using Co-precipitation method and Copper based catalyst. In this preliminary study, the DME synthesis of catalysts based on Methanol catalyst has been modified by combined it with HZSM-5 as dual catalyst. This process will perform DME production in one step Fixed Bed Reactor. micromeritic reactor at mild operating condition. The results of modified catalyst to Sud-Chemie/NaHZSM-5 Si/Al 25 showed that DME synthesis at 30 bar and 270oC reach a good conversion, up to 0.9% and predicted still able to increase.
Keywords: low rank coal, DME synthesis, low cost catalyst, low pressure fixed bed reactor
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under creativecommons.org/licenses/by-sa/4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Ilmiah Teknik Kimia have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, Jurnal Ilmiah Teknik Kimia recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
Jurnal Ilmiah Teknik Kimia is licensed under a Creative Commons Attribution 4.0 International License
YOU ARE FREE TO:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.