ANALISA PENGENDALIAN KUALITAS PRODUK KABEL NFA2X DENGAN MENGGUNAKAN METODE NEW SEVEN TOOLS UNTUK MEMINIMALKAN DEFECT DI PT. PRIMA CABLE INDO
DOI:
https://doi.org/10.32493/jitmi.v4i1.y2021.p10-19Keywords:
Controlling the quality, product failure, new seven toolsAbstract
PT. Prima Cable Indo is a company that produces electric cable. The quality of the product is very important to maiantain a customer satisfaction, and qualiy control is a must for PT. Prima Cable Indo. Quality control is a requirement to ensure that the product meets the conformity of the estahabilished standard. Research conducted at PT. Prima Cable Indo aimz to minimize the number of defective products resulting from the production process, especially for the NFA2X cable type. PT.Prima Cabale Indo applies the new seven tools in controlling quality, consists of some steps which are affinity diagram, interrelationship diagram, matrix diagram, matrix data analysis, and tree diagram. The failures found in NFA2X cable among others are breakdown voltage, rough cable surface, loosened cable strands, and insulation is not center. The result finds some factors that cause the defect of NFA2X cable are the workers, materials, machine, environment, and method.
References
Ariani, Dorothea Wahyu. 2004. Pengendalian Kualitas Statistik (Pendekatan Kualitas dalam Manajemen Kualitas). Yogyakarta: Andi
Assauri, Sofjan 2008. Manajemen Produksi Dan Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia.
Besterfield, Dale H. 2009. Quality Control Eighth Edition, Prentice Hall International Inc, New Jersey.
Chandradevi, A., & Puspitasari, N. B. 2016. Analisa Pengendalian Kualitas Produksi Botol X 500 Ml Pada PT. Berlina, Tbk Dengan Menggunakan Metode New Seven Tools. Industrial Engineering Online Journal, 5(4).
Fauzia, A. I., & Hariastuti, N. L. P. 2019. Analisis Pengendalian Kualitas Produk Beras dengan Metode Six Sigma dan New Seven Tools. Jurnal Senopati: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 1(1), 1-10.
Gasperz, Vincent. 2005. Total Quality Manajemen. Jakarta : PT. Gramedia Pustaka Utama
Ghozali, I. 2016. Desain Penelitian Kuantitatif & Kualitatif. Semarang.
Madeali, W. B. 2019. ANALISIS KUALITAS PRODUKSI TEMPE DENGAN METODE SEVEN TOOLS DI UD MAJU JAYA. JITMI (Jurnal Ilmiah Teknik dan Manajemen Industri), 2(1), 74-80.
Maulana, A. 2020. Rancang Ulang Proses Penjernihan Air Dalam Meningkatkan Kualitas Produksi Perusahaan Daerah Air Minum (Studi Kasus Pada PT. Traya Tirta Cisadane–Serpong). TEKNOLOGI: Jurnal Ilmiah dan Teknologi, 2(1), 7-14.
Maulana, Y. (2020). Perancangan Framework Decision Support System Untuk Persediaan Bahan Baku Dalam Pengendalian Proses Produksi Dengan Odoo Manufacturing Di Pt. 3a Precise Scale. Jitmi (Jurnal Ilmiah Teknik Dan Manajemen Industri), 3(1), 49-58.
Maulana, Y., Wahyu, W., Dahniar, T., & Alqodri, Z. F. (2020). Praktikum Perencanaan Dan Perancangan Produk.
Mitra, A. 2008. Fundamentals of Quality Control and Improvement. Hokoben: John Wiley & Sons, Inc.
Montgomery, D.C. 1990. Pengantar Pengendalian Kualitas Statistik. Yogyakarta: Gadjah Mada University Press.
Nasution, A.H. 2006. Manajemen Industri, ed-I. Yogyakarta : CV. ANDI Yogyakarta.
Nayatani, Y.E., T. Futami., dan H, Miyagawa. 2010 The Seven New QC Tools : Practical Applications for Managers (J.H. Loflus, Trans). Jepang : JUSE Press.
Rahayuningtyas, W., & Sriyanto, S. 2018. ANALISIS PENGENDALIAN KUALITAS PADA PRODUK TAHU BAXO IBU PUDJI MENGGUNAKAN METODE NEW SEVEN TOOLS (Studi Kasus pada CV. Pudji Lestari Sentosa). Industrial Engineering Online Journal, 6(4).
Suci, Y. F., Nasution, Y. N., & Rizki, N. A. 2017. Penggunaan Metode Seven New Quality Tools dan Metode DMAIC Six Sigma Pada Penerapan Pengendalian Kualitas Produk. JURNAL EKSPONENSIAL, 8(1), 27-36.
Wisnianingsih, N., Estiningsih, E., & Sewaka, S. 2018. PENGARUH KADAR AIR PALM SUGAR (GULA SEMUT) SEBAGAI FAKTOR PENGENDALIAN KUALITAS PADA CV. DWI SARANA MANDIRI DENGAN MENGGUNAKAN METODE SEVEN TOOLS. TEKNOLOGI: Jurnal Ilmiah dan Teknologi, 1(1), 80-79.
Zakariya, Y., Mu’tamar, M. F. F., & Hidayat, K. 2020. Analisis Pengendalian Mutu Produk Air Minum dalam Kemasan Menggunakan Metode New Seven Tools (Studi Kasus di PT. DEA). Rekayasa, 13(2), 97-102.
(Online) diakses pada tanggal 21 Desember 2020
http://e-learning.stmi.ac.id/blog/dosen/angelia-merdiyanti
(Online) diakses pada tanggal 13 November 2020
http://daliyaniputrimaharani.blogspot.com/2016/11/tugas-pengantar-bisnis-organisasi.html
(Online) diakses pada tanggal 24 November 2020
http://evendiesblog.blogspot.com/2010/07/proses-pembuatan-kabel.html
(Online) diakses pada tanggal 30 Oktober 2020
https://ilmumanajemenindustri.com/pengertian-diagram-hubungan-relationship-diagram-cara-membuatnya/
(Online) diakses pada tanggal 15 Desember 2020
http://www.primacableindo.co.id
(Online) diakses pada tanggal 10 Juli 2020
(Online) diakses pada tanggal 1 November 2020
(Online) diakses pada tanggal 21 Desember 2020
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
