Analisis Risiko Komponen Mesin Press Hidrolik 350 Ton Menggunakan Bow-Tie Analysis
DOI:
https://doi.org/10.32493/jitmi.v6i1.y2023.p51-57Keywords:
Barrier, Bow-Tie Analysis, Mesin Pres HidrolikAbstract
Mesin pres hidrolik adalah perangkat manufaktur yang dirancang dan dibangun untuk mengoperasikan tekanan menggunakan sistem penggerak hidrolik untuk memberikan beban yang terkendali, dimana pada proses pekerjaan dengan mesin ini seringkali terjadi kecelakaan seperti pekerja yang terjepit mesin pres ini. Hal ini memiliki dampak pada pekerja mulai dari cedera hingga kematian, serta mengakibatkan kerugian bagi perusahaan terkait. Adanya berbagai masalah tersebut dapat membuat proses produksi di perusahaan menjadi terganggu dan dapat menjadi potensi bahaya untuk para pekerja. Potensi bahaya tersebut dapat dikurangi dengan menggunakan metode Bow-Tie Analysi suntuk menggambarkan dan menganalisis jalur suatu risiko dari penyebab hingga dampaknya.
References
Acfield, A. P., & Weaver, R. A. (2012). Integrating Safety Management Through the Bowtie Concept a Move Away from the Safety Case Focus. Proceedings of the Australian System Safety Conference, Assc, 3–12. http://dl.acm.org/citation.cfm?id=2527218.2527219
Adhiharto, R., Patriatna, E., Fauzan, M., Teknik, J., Manufaktur, P., Manufaktur, P., & Bandung, N. (2018). Studi Perancangan Mesin Press Hidrolik 50 ton dengan Metode VDI 2222.
Alizadeh, S. S. (2020). The Bowtie method in safety management system: A literature review. Scientific Journal of Review, August. https://doi.org/10.14196/sjr.v4i9.1933
Amiolemhen, P., & Ogie, N. (2019). DESIGN AND MANUFACTURE OF A 10-TONNE HYDRAULIC PRESS. Journal of Production Engineering, 22, 10–14. https://doi.org/10.24867/JPE-2019-01-010
Erajati, D., Subekti, A., & Khairansyah, M. D. (2017). Identifikasi Bahaya dengan Menggunakan Metode Bowtie untuk Keselamatan Proses pada Boiler UBB di Pabrik III PT . Petrokimis Gresik. Proceeding 1st Conference on Safety Engineering and Its Application, 1(2581), 147–152.
Hosseinnia Davatgar, B., Paltrinieri, N., & Bubbico, R. (2021). Safety barrier management: Riskâ€based approach for the oil and gas sector. Journal of Marine Science and Engineering, 9(7). https://doi.org/10.3390/jmse9070722
Hudson, P. (2013). Integrating Organisational Culture into Incident Analyses: Extending the Bow Tie Model. https://doi.org/10.2118/127180-MS
Lewis, S., & Smith, K. (2023). Lessons Learned from Real World Application of the Bow-tie Method.
Sidik, J., Andalia, W., Tamalika, T., Industri, J. T., Teknik, F., & Tridinanti, U. (2022). Identifikasi Perawatan Mesin Press Hidrolik dengan Menggunakan Metode FMEA dan FTA ( Studi Kasus di Bengkel Cahaya Ilahi ). 2(2), 57–64. https://doi.org/10.37905/jirev.2.2.57-64
WACHYUDI, Y. (2010). Identifikasi bahaya, analisis, dan pengendalian risiko dalam tahap desain proses produksi minyak & gas di kapal FLOATING PRODUCTION STORAGE & OFFLOADING (FPSO) UNTUK PROJEK PETRONAS.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
