Analisis Perawatan Gate Valve Dengan Metode Reliability Centered Maintenance (RCM) Di PT. Valvindo Mitra Raya

Authors

  • Agus Syahabuddin Universitas Pamulang
  • Adi Candra Universitas Pamulang
  • Muhammad Syaiful Habidin Universitas Pamulang

DOI:

https://doi.org/10.32493/jitmi.v4i2.y2021.p141-149

Keywords:

RCM, FMEA, IDT, LTA, Maintenance

Abstract

Competition in the industry is getting tougher, and companies are required to make improvements in various departments, one of which is the maintenance department which supports system operations so that they run as desired. PT. Valvindo Mitra Raya which is engaged in Water Pipe Installation and Machanical Repair/Reconditioning. Until now, preventive maintenance activities are scheduled every year, but the maintenance department still carries out many corrective maintenance activities. This final project aims to determine the optimal maintenance action and determine maintenance intervals on the Gate Valve machine. In order to achieve the goal of writing, perform a detailed analysis using the Reliability Centered Maintenance (RCM) method, where the initial application is to find out the functions and damage that can occur in a system, starting from the sub-system to the component level, FMEA table for determining critical components, for determine the direct or indirect impact with Intermediate Decision (IDT) analysis, and then to determine the optimal maintenance task through Logic Tree Analysis (LTA). The results obtained are in the form of problem solving, namely the company performs machine maintenance intervals on Disc components with maintenance intervals of 224.39 hours or 32 working days, with the aim of knowing the level of component damage by carrying out Condition Monitoring actions, to overcome unpredictable failures by performing Corrective Maintenance actions and to overcome failures that are affected by the age of components, scheduled replacement actions.

References

Ahmadi, N. and Hidayah, N. Y. (2017) ‘Jurnal Optimasi Sistem Industri Analisis Pemeliharaan Mesin Blowmould Dengan Metode RCM Di PT . CCAI’, Jurnal Optimasi Sistem Industri, 2(2), pp. 167–176.

Andriyani, A. and Rumita, R. (2017). "Analisis Upaya Pengendalian Kualitas Kain Dengan Metode Failure Mode and Effect Analysis (Fmea) Pada Mesin Shuttel Proses Weaving PT Tiga Manunggal Synthetic Industries", Program Studi Teknik Industri, Fakultas Teknik, Universitas Diponegoro, 6(1).

Aufar, A. N., Kusmaningrum and Prassetiyo, H. (2014) ‘Usulan Kebijakan Perawatan Area Produksi Trim Chassis Dengan Menggunakan Metode Reliability Centered Maintenance (Studi Kasus : PT. Nissan Motor Indonesia)’, Jurnal Online Institut Teknologi Nasional, 02(04), pp. 25–36.

Indah Permatasari, 2019 'Penerapan Metode Fault Tree Analysis dan Failure Mode and Effect Anaysis Untuk Meninkatkan Kualitas Produk Busana Muslim (Studi kasus di Brand X) Universitas pendidikan Indosesia, repository.upi.edu, perpustakaan.upi.edu’, pp. 1–7.

Kurniawan, Fajar. (2013). Teknik dan Aplikasi Manajemen Perawatan Industri. Edisi Pertama. Yogyakarta: Graha Ilmu.

Huda, S. (2016). Analisis Perawatan Mesin Produksi dan Penyebab Kegagalan Mesin dengan Metode Reliability Centered Maintenance (RCM) dan Fault Trees Analysis (FTA). (Universitas Sumatra Utara).

Kasus, S., Graphy, M. and Rumita, R. (2014) ‘Perencanaan Sistem Perawatan Mesin Urbannyte Dengan Menggunakan Metode Reliability Centered Maintenance II ( RCM II )’, (Rcm Ii), pp. 1–8.

Ninny Siregar, H. and Munthe, S. (2019) ‘Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau’, Jime (Journal of Industrial and Manufacture Engineering), 3(2), pp. 87–94.

Praja, I. I. (2019). 'Analisis Perawatan Mesin Conveyor Unloading Phosphate Rock Mesir dengan Metode Reliability Centered Maintenance (RCM)(Studi Kasus di PT Petrokimia Gresik)'. (Universitas Muhammadiyah Gresik).

Prayogi, M. F., Sari, D. P. and Arvianto, A. (2016) ‘Analisis Penyebab Cacat Produk Furniture Dengan Menggunakan Metode Failure Mode and Effect Analysis ( Fmea ) Dan Fault Tree Analysis ( Fta )’, industrial Engineering Online Journal, 5(4).

Pranoto, Hadi. 2015. Reliability Centered Maintenance (RCM) Universitas Mercu Buana. Mitra Wacana Media, Jakarta.

Puspitasari, N. B. and Martanto, A. (2014) ‘Penggunaan Fmea Dalam Mengidentifikasi Resiko Kegagalan Proses Produksi Sarung Atm (Alat Tenun Mesin) (Studi Kasus Pt. Asaputex Jaya Tegal)’, J@Ti Undip : Jurnal Teknik Industri, 9(2), pp. 93–98. doi: 10.12777/jati.9.2.93-98.

Rambuna, O. (2019). Penerapan Metode Reliability Centered Maintenance (RCM) Pada Mesin Produksi Obat-Obatan (ITN MALANG).

Ropi’i, A. (2019). Analisis Perawatan Mesin Cooling Tower Dengan Metode Reliability Centered Maintenance (Rcm) Pada Pt. Tifico Fiber Indonesia Tbk. (Universitas Pamulang).

Setiawan, A. (2018). Analisis Perawatan Mesin Bubut Konvensional Dengan Metode Reliability Centered Maintenance (Rcm) Di Pt. Chitra Bhaskara Indah. (Universitas Pamulang).

Sukanta, Herwanto, D. and Yulian, Y. (2015) ‘Analisis Kegagalan Sistem pada Perawatan Mesin Evaporator Menggunakan Metode FMEA Dan FTA’, Prosiding Seminar Nasional Penelitian dan Pengabdian pada Masyarakat, pp. 290–295.

Suryanto, D. (2020). Analisis Perawatan AC (Air Conditioner) Unit Split Duct Menggunakan Metode Failure Mode And Effect Analysis Fmea di Hotel Harris Yello. JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri), 3(1), 67-75.

Syahabuddin, A. (2019) ‘Analisis Perawatan Mesin Bubut Cy-L1640G Dengan Metode Reliability Centered Maintenance (Rcm) Di Pt. Polymindo Permata’, JITMI (Jurnal Ilmiah Teknik dan Manajemen Industri), 2(1), p. 27. doi: 10.32493/jitmi.v2i1.y2019.p27-36.

Utami, R. T., & Hariastuti, N. L. P. (2016). Analisis Kecacatan Produk Menggunakan Metode Fmea Dan Fta Pada Pt. Xxx. In Prosiding Seminar Nasional Sains dan Teknologi Terapan (pp. 291-300).

Downloads

Published

2021-10-27

Issue

Vol. 4 No. 2 (2021): JITMI

Section

Articles

License

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  1. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri  recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.