Analisis Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Ekstrusi di PT. Polymindo Permata

Authors

  • Agus Syahabuddin Universitas Pamulang
  • Muhammad Yusuf Universitas Pamulang
  • Marjuki Zulziar Universitas Pamulang

DOI:

https://doi.org/10.32493/jitmi.v6i1.y2023.p42-50

Keywords:

Total Productive Maintenance, Overall Equipment Effectiveness, six big losses, loss time,

Abstract

The smooth running of a system or a production process requires support from several aspects, including machine maintenance and machine availability in the production system. Maintenance includes the efforts made to ensure the machine works well, effectively, efficiently, economically, functionally and optimally. Therefore we need a good maintenance management in order to support maintenance activities, this study aims to determine the effectiveness and the biggest problem that causes downtime on the extrusion machine. The steps taken to implement it are measuring Overall Equipment Effectiveness (OEE) and knowing the biggest factors that affect the calculation of the six big losses. The world class productivity standard formulated by the Japan Institute of Plant Maintenance (JIPM), is 85%. The results of the current OEE measurement show that the productivity of the extrusion machine is 76.18%. This value indicates that it does not reach the worldclass standard value.

References

Nina H, Raden R. A, dan Rino A.W (2020) analisis total productive maintenance(TPM) pada stasiun kernel crushing plant(KCP) di pt. X Jurnal Teknologi Pertanian Andalas Vol. 23, No.1,Maret 2020, ISSN 1410-1920, EISSN 2579-4019

Aryanti, N. (2018). Penerapan total productive maintenance (tpm) terhadap efektivitasmesin produksi teh PT. Perkebunan nusantara viii cabang panglejar (Doctoral dissertation, Perpustakaan Fakultas Ekonomi dan Bisnis Unpas Bandung).

Hamda Pahmi (2018) Analisis Nilai Overall Equipment Effectiveness (OEE) Untuk Meningkatkan Performa Mesin Exuder Di PT Pralon, Jurnal Ilmiah Teknologi dan Rekayasa Volume 23 No. 2 Agustus 2018

Nursanti, I., & Susanto, Y. (2014). Analisis Perhitungan Overall Equipment Effectiveness (OEE) Pada Mesin Packing Untuk Meningkatkan Nilai Availability Mesin.

Rinawati, D. I., & Dewi, N. C. (2014). Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Efectiveness (OEE) Dan Six Big Losses Pada Mesin Cavitec Di PT. Essentra Surabaya. Prosiding SNATIF, 21-26.

Yudi Iswanto, Syamsuri dan Prabowo, Roni . (2017). Analisis Penerapan Total Productive Maintenance (TPM) dengan Overall Equipment Effectiveness (OEE) Pada Pompa Sentrifugal Studi Kasus : PT. XYZ. Jurnal Jurusan Teknik Industri, Fakultas Teknologi Industri, Institut Teknologi Adhi TamaSurabaya.

Downloads

Published

2023-07-08

Issue

Vol. 6 No. 1 (2023): JITMI

Section

Articles

License

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  1. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri have CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, JITMI : Jurnal Ilmiah Teknik dan Manajemen Industri  recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY-SA or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.