Perancangan Alat Latihan Tinju Pengukur Jumlah Pukulan dan Kekuatan Pukulan Berbasis Internet of Things (IoT)

Authors

  • Annisa Ul Alliya Politeknik Negeri Sriwijaya
  • Lindawati Lindawati Politeknik Negeri Sriwijaya
  • Eka Susanti Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.32493/jtsi.v7i3.42001

Keywords:

Boxing, Piezoelectric, Internet of Things

Abstract

Maintaining physical health is crucial, and one way to achieve this is through regular exercise. Boxing is a suitable choice as it not only helps maintain fitness but also serves as self-defense, relying on punching skills. Previously, a device was developed to measure kick strength, but its results were only accessible via a localhost web interface, limiting access from other devices. This study aims to design a device for measuring the quantity and strength of punches in boxing, accessible anywhere via the internet. The device utilizes piezoelectric sensors with a web interface for measurement. In addition to piezoelectric sensors, it incorporates Arduino Mega, LCD, and ESP32. Sensor accuracy testing showed an average error rate 5.09% and 0% data transmission failure. Over 60 seconds in 30 trials, an average of 90 punches were recorded with an average punch strength of 800.

References

Halomoan, Rinaldi. 2020. “Development of Samsak to Improve Technical Ability to Fight in Extracurricular Tarung Derajat in Senior High School.” 3(2):18–27.

Hardiansyah, Harry. 2023. Pengembangan Alat Pengukur Kekuatan Tendangan Beladiri Pencak Silat Dengan Sensor Load Cell.

Harsono. 1988. Coaching Dan Aspek-Aspek Psikologi Dalam Coaching. Jakarta: Departemen Pendidikan dan Kebudayaan.

Lahinda, Jori, Carolus Wasa, and Pulung Riyanto. 2020. “Pengaruh Program Latihan Peningkatan Daya Tahan Jantung Paru Pada Ukm Tinju.” Kinestetik 4(1):7–13. doi: 10.33369/jk.v4i1.10257.

Malaric, Roman. 2011. Instrumentation and Measurement in Electrical Engineering. Boca Raton: Universal-Publishers.

Novaliendry, Dony, Asrul Huda, Muhammad Rinov Cuhanazriansyah, Hesty Kumala Sani, Herisvan Hendra, and Joni Karnando. 2021. “E-Learning Based Web Programming Course in the COVID 19 Pandemic Time.” International Journal of Interactive Mobile Technologies 15(20):117–30. doi: 10.3991/ijim.v15i20.23749.

Pendra, Aldi. 2020. “Perancangan Alat Ukur Kekuatan Tendangan Berbasis Mikrokontroler Untuk Monitoring Perkembangan Latihan Pesilat.” Jurnal Berkala Epidemiologi 5(1):90–96.

Seta, Satrio Bayu, and Wijono. 2021. “Analisis Frekuensi Pukulan Dalam Pertandingan Tinju Profesional.” Jurnal Prestasi Olahraga 4(3):144–50.

Setyawan, Risfandi. 2022. Mengenal Pelatihan Kondisi Fisik Level Dasar. Vol. 1. I. edited by Indah. Sukabumi: Haura Utama.

Sholihin; Nurjaya; Ardhiansyah, Maulana. 2022. Membangun Web Dengan Framework Laravel 8. edited by T. Hidayati. Tangerang Selatan: Pascal Books.

Sumarjo, Sumarjo. 2022. “Hambatan-Hambatan Cabang Olahraga Tinju Di Kabupaten Pidie.” Jurnal Real Riset 4(2):277–87. doi: 10.47647/jrr.v4i2.677.

Trimarsiah, Yunita. 2024. “Pelatihan Pembuatan Website Pada Kantor Kelurahan Talang Jawa Baturaja Sumatera Selatan.” Jurnal Pengabdian Bersama Masyarakat Indonesia 2(1):09–22.

Jurnal Teknologi Sistem Informasi dan Aplikasi Vol. 7 No. 3 Juli 2024

Downloads

Published

2024-07-31

How to Cite

Alliya, A. U., Lindawati, L., & Susanti, E. (2024). Perancangan Alat Latihan Tinju Pengukur Jumlah Pukulan dan Kekuatan Pukulan Berbasis Internet of Things (IoT). Jurnal Teknologi Sistem Informasi Dan Aplikasi, 7(3), 1188–1193. https://doi.org/10.32493/jtsi.v7i3.42001

Issue

Vol. 7 No. 3 (2024): Jurnal Teknologi Sistem Informasi dan Aplikasi

Section

Article

License

Copyright (c) 2024 Annisa Ul Alliya, Lindawati Lindawati, Eka Susanti

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Teknologi Sistem Informasi dan Aplikasi have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Jurnal Teknologi Sistem Informasi dan Aplikasi recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt - remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms