Teknik Pengujian Equivalence Partions untuk Pengujian Aplikasi Sistem Penunjang Keputusan Pegawai Terbaik Menggunakan Black Box

Authors

  • Ahmad Zuhair Pamulang University
  • Farhan Khadafi Pamulang University
  • Achmad Muzakih Andriansyah Pamulang University
  • Bayu Saputra Pamulang University
  • Aries Saifudin Pamulang University http://orcid.org/0000-0002-3882-633X

DOI:

https://doi.org/10.32493/jtsi.v3i3.5365

Keywords:

Application, Testing, Black Box, Equality Partition, Decision Support System

Abstract

The development of decision support system applications for the selection of the best employees is very important to support management in making decisions. This application must be free of errors because if there are errors can be detrimental to several parties, both the company and the employee. To guarantee that the floating application is error free, a test is needed. Testing on an application aims to check whether a program is running properly or there are still errors that must be corrected so that the program created will be a program that has good quality. The testing technique consists of White Box Testing and Black Box Testing which are widely used by testers to check the program is appropriate or not. The Best Employee Decision Support Application will be tested using Black Box Testing where the test only aims to see whether the program is in accordance with the function desired by the program without knowing the program code used. Types of testing of the various Black Box methods, one of which is the Equivalence Partitions used by the authors in this study. Equivalence Partitions Technique is a test based on data entry on each form in the Best Employee Decision Support System, each input menu will be tested and grouped according to function whether it is valid or invalid. With this test the quality of the software created can be expressed objectively very well and has fulfilled all the requirements set.

References

Akiladevi, R., Vidhupriya, P., & Sudha, V. (2018). A Study and Analysis on Software Testing Tools. International Journal of Pure and Applied Mathematics, 118(18), 1783-1800.

Ardana, I. S. (2019). Pengujian Software Menggunakan Metode Boundary Value Analysis dan Decision Table Testing. Jurnal Teknologi Informasi, XIV(03), 40-47.

Aristoteles, Wardiyanto, & Pratama, A. A. (2015). Sistem Pakar Diagnosa Penyakit Pada Ikan Budidaya Air Tawar dengan Metode Forward Chaining. Jurnal Komputasi, 3(2), 99-168.

Aziz, I. A., Setiawan, B., Khanh, R., Nurdiyansyah, G., & Yulianti, Y. (2020). Pengujian Black Box pada Aplikasi Sistem Kasir Berbasis Website Menggunakan Teknik Equivalence Partitions. Jurnal Teknologi Sistem Informasi dan Aplikasi, 3(2), 10.32493/jtsi.v3i2.4693. doi:10.32493/jtsi.v3i2.4693

Debiyanti, D., Sutrisna, S., Budrio, B., Kamal, A. K., & Yulianti, Y. (2020). Pengujian Black Box pada Perangkat Lunak Sistem Penilaian Mahasiswa Menggunakan Teknik Boundary Value Analysis. Jurnal Informatika Universitas Pamulang, 5(2), 162-166. doi:10.32493/informatika.v5i2.5446

Hendri, H., Manurung, J. W., Ferian, R. A., Hanaatmoko, W. F., & Yulianti, Y. (2020). Pengujian Black Box pada Aplikasi Sistem Informasi Pengelolaan Masjid Menggunakan Teknik Equivalence Partitions. Jurnal Teknologi Sistem Informasi dan Aplikasi, 3(2), 107-113. doi:10.32493/jtsi.v3i2.4694

Hidayat, T., & Muttaqin, M. (2018). Pengujian Sistem Informasi Pendaftaran dan Pembayaran Wisuda Online menggunakan Black Box Testing dengan Metode Equivalence Partitioning dan Boundary Value Analysis. Jutis (Jurnal Teknik Informatika), 6(1), 25-29.

Latif, A. (2015). Implementasi Kriptografi Menggunakan Metode Advanced Encryption Standar (AES) Untuk Pengamanan Data Teks. Jurnal Ilmiah Mustek Anim, 4(2), 163-172.

Mustaqbal, M. S., Firdaus, R. F., & Rahmadi, H. (2015). Pengujian Aplikasi Menggunakan Black Box Testing Boundary Value Analysis (Studi Kasus : Apilkasi Prediksi Kelulusan SNMPTN). Jurnal Ilmiah Teknologi Informasi Terapan, 1(3), 31-36. doi:10.33197/jitter.vol1.iss3.2015.62

MZ, M. K. (2016). Pengujian Perangkat Lunak Metode Black-Box Berbasis Equivalence Partitions Pada Aplikasi Sistem Informasi Sekolah. Jurnal Mikrotik, 2-8.

Nurudin, M., Jayanti, W., Saputro, R. D., Saputra, M. P., & Yulianti, Y. (2019). Pengujian Black Box pada Aplikasi Penjualan Berbasis Web Menggunakan Teknik Boundary Value Analysis. Jurnal Informatika Universitas Pamulang, 4(4), 143-148. doi:10.32493/informatika.v4i4.3841

Pratama, B. P., Ristianto, I. B., Prayogo, I. A., Nasrullah, & Saifudin, A. (2020). Pengujian Perangkat Lunak Sistem Informasi Penilaian Mahasiswa dengan Teknik Boundary Value Analysis Menggunakan Metode Black Box Testing. Journal Of Artificial Intelligence And Innovative Applications, 32-36.

Sethi, M. A. (2017). A Review Paper On Levels, Types & Techniques In Software Testing. International Journal of Advanced Research In Computer Science, 8(7), 269-271.

Taufiq, R., Magfiroh, D. A., Yusup, D., & Yulianti, Y. (2020). Analisis dan Desain Sistem Informasi Pembayaran Sumbangan Pembinaan Pendidikan (SPP) di SMK Avicena Rajeg. Jurnal Teknologi Sistem Informasi dan Aplikasi, 3(1), 15-21. doi:10.32493/jtsi.v3i1.4308

Wahyudi, R., Utami, E., & Arief, M. R. (2016). Sistem Pakar E-Tourism Pada Dinas Pariwisata D.I.Y Menggunakan Metode Forward Chaining. Jurnal Ilmiah DASI, 17(2), 67-75.

Jurnal Teknologi Sistem Informasi dan Aplikasi Vol. 3 No. 3 Juli 2020

Downloads

Published

2020-08-08

How to Cite

Zuhair, A., Khadafi, F., Andriansyah, A. M., Saputra, B., & Saifudin, A. (2020). Teknik Pengujian Equivalence Partions untuk Pengujian Aplikasi Sistem Penunjang Keputusan Pegawai Terbaik Menggunakan Black Box. Jurnal Teknologi Sistem Informasi Dan Aplikasi, 3(3), 132–137. https://doi.org/10.32493/jtsi.v3i3.5365

Issue

Vol. 3 No. 3 (2020): Jurnal Teknologi Sistem Informasi dan Aplikasi

Section

Article

License

Copyright (c) 2020 Ahmad Zuhair, Farhan Khadafi, Achmad Muzakih Andriansyah, Bayu Saputra, Aries Saifudin

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Teknologi Sistem Informasi dan Aplikasi have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Jurnal Teknologi Sistem Informasi dan Aplikasi recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt â€” remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms