Perancangan Sistem Otomatisasi Berbasis Id Card Dan Internet Of Things (Iot) Pada Pintu Kamar Kost Menggunakan Microkontroller Esp32

Febiyana Firdaus; Agus Suhendi

Authors

Febiyana Firdaus Universitas Pamulang
Agus Suhendi Universitas Pamulang

Keywords:

Sistem Otomatisasi, RFID ID Card, Internet of Things, Pintu Otomatis, ESP32, Rumah pintar

Abstract

In the modern technological era, effective and easy-to-use security systems are increasingly needed, especially for rental properties such as boarding houses. The purpose of this research is to develop and design an ID card-based rental door automation system and the Internet of Things (IoT) using an ESP32 microcontroller in the Secang environment. This system consists of several main components, namely an ESP32 microcontroller as a control center, an RFID reader to read ID cards, and a Wi-Fi module to connect to the IoT. Only tenants who have registered their ID cards in the system can open the rental door. The IoT platform records and monitors access in real-time, allowing homeowners to track entry and exit activities. This research uses a prototype model research and development (R&D) approach to build an automatic room door locking system and device based on an Authorized Card. It is clear that the implementation of this system has good results. Reliability and security are tested in various situations. The system will recognize individual identities and automatically open the door. In addition, IoT-based monitoring capabilities allow owners to receive alerts in the event of unauthorized access. The results of the study show that ID cards that function with ESP32 and IoT-based door automation systems can serve as an effective solution to improve security and efficiency in rental residences.

References

G. Eason, B. Noble, dan I.N. Sneddon, “On certain integrals of Lipschitz-Hankel type involving products of Bessel functions,” Phil. Trans. Roy. Soc. London, vol. A247, hal. 529-551, April 1955.

S. Andrean, S. Y. Putri, et al., “No title,” n.d.

F. Badri, H. Afifah, A. M. Jannah, M. Nafis, N. Murom, dan A. Andhyka, “Simulasi rancang bangun palang pintu otomatis berbasis RFID (Radio Frequency Identification),” JISTI: Jurnal Ilmiah Terapan, Sains dan Teknologi, vol. 1, no. 3, pp. 137–143, 2023.

R. Bima, “Analisis RFID Reader MFRC522 pada sistem informasi lokasi meja pelanggan Kopi Kenangan,” Jurnal Komputer Teknologi Informasi dan Sistem Informasi (JUKTISI), vol. 2, no. 1, pp. 248–256, 2023.

M. Fauza dan M. A. Muthalib, “Sistem pengaman pintu otomatis menggunakan sensor Radio Frequency Identification (RFID) berbasis Arduino Uno,” Jurnal Energi Elektrik, vol. 11, no. 1, p. 30, 2022.

I. G. P. Wirajaya, “Penerapan rancang bangun pintu kunci menggunakan sensor Radio Frequency Identification (RFID),” Politeknik Negeri Bali, 2023.

M. Hipotesis, M. Nur, R. P. Junita, et al., “JOLR,” vol. 1, no. 2, pp. 810–820, 2025.

K. Lesmana, “Prototipe penggunaan motor servo untuk dispenser otomatis berbasis Arduino dan sensor HC-SR04,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 13, no. 2, pp. 16–22, 2025.

A. Martani, J. Junaedy, dan M. Gogasa, “Prototipe robot penanam benih jagung berbasis ESP32-CAM,” Journal of System and Computer Engineering (JSCE), vol. 4, no. 2, pp. 145–153, 2023.

Y. A. Muhammad dan R. A. Permana, “Prototipe monitoring lampu jalan otomatis menggunakan mikrokontroler ESP32 dan API Bot Telegram,” Jurnal Teknik Informatika STMIK Antar Bangsa, vol. 9, no. 2, pp. 57–62, 2023.

P. Pengujian, “Hipotesis penelitian dalam statistik manajemen pendidikan: Konsep,” vol. 1, pp. 425–433, 2025.

Y. R. Putung, H. S. Langi, S. Kasenda, dan T. J. Wungkana, “Perancangan sistem akses masuk ruangan berbasis Internet of Things (IoT) dengan kartu tanda penduduk (KTP) elektronik,” vol. 4, no. 1, pp. 63–70, 2025.

A. Rahayu, “Tahapan,” Jurnal Pendidikan dan Pembelajaran, vol. 4, no. 3, pp. 459–470, 2025.

D. A. Ramadini et al., “Pintu menggunakan IoT berbasis E-KTP,” vol. 13, no. 1, 2025.

H. Saputri, U. Kusnaedi, dan Y. Asmana, “Pengaruh sistem informasi akuntansi terhadap kualitas laporan keuangan perusahaan jasa di Jakarta Utara,” vol. 1, no. 4, pp. 102–109, 2023.

A. Selay et al., “Karimah Tauhid,” vol. 1, no. 6, pp. 861–862, 2022.

S. Sutarti, T. Triyatna, dan S. Ardiansyah, “Prototype sistem absensi siswa/i dengan menggunakan sensor RFID berbasis Arduino Uno,” PROSISKO, vol. 9, no. 1, pp. 76–85, 2022.

V. N. Tahun et al., “Jurnal Al Ulum LPPM Universitas Al Washliyah Medan,” vol. 14, no. 1, 2026.

R. Tho, A. Firdaus, S. Sabila, dan Y. Yuniarsih, “Strategi target pasar pada produk custom acrylic di Kota Bandung,” vol. 3, no. 1, 2023.

U. M. Tyas et al., “Implementasi aplikasi Arduino IDE pada mata kuliah sistem digital,” vol. 1, Apr. 2023