Rancang Bangun Mesin Pemotong Kentang Stick dengan Sistem Pemasak dan Pemberian Rasa Otomatis Berbasis IoT
DOI:
https://doi.org/10.32493/jtsi.v7i3.42279Keywords:
IoT; Potato Stick Cutter; Android Application; Automatic Cooker; automatic flavorerAbstract
Potatoes are one of the most popular snacks, especially in the food industry, where they are often processed into potato sticks. However, the production process for ready-to-eat potato sticks tends to be complex and requires significant time and labor. This research designs a potato stick cutting machine with an automatic cooking and seasoning system using Internet of Things (IoT) technology to simplify the production process. The machine is integrated with an IoT network and equipped with an Android application for system monitoring. Microcontrollers act as the main controller, managing machine operations based on instructions from the Android application and sensors on the machine. The result of this research is the development of an intelligent machine that can produce potato sticks with guaranteed quality and consistency according to user preferences. This machine also improves production efficiency by reducing the time and labor required, and it provides ease of monitoring and controlling the production process remotely through the Android application, thereby significantly contributing to the modern food industry.
References
Alfino, Novri Rezky, and Aswardi Aswardi. 2020. “Rancang Bangun Alat Pemotong Kentang Berbentuk Stick Berbasis Mikrokontroller ATMega 328.” JTEV (Jurnal Teknik Elektro Dan Vokasional) 6(2):8. doi: 10.24036/jtev.v6i2.108023.
Fiantono, Lukman Fajar Andri. 2020. “Pemotong Dan Penggoreng Kentang Berbasis Arduino Mega 2560.” Institut Teknologi Nasional Malang.
Hanifiyah Darna Fidya Amaral, Divac Nabiel Akbar, and Afidah Zuroida. 2023. “Rancang Bangun Sistem Pemberian Pakan Ikan Lele Otomatis Berbasis Mikrokontroler.” Elposys: Jurnal Sistem Kelistrikan 9(3):179–82. doi: 10.33795/elposys.v9i3.654.
International Potato Center. 2013. Tackling Global Research and Development.
Manullang, Andi Boy Panroy, Yuliarman Saragih, and Rahmat Hidayat. 2021. “Implementasi Nodemcu Esp8266 Dalam Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis IOT .” JIRE (Jurnal Informatika & Rekayasa Elektronika) 4(2).
Nur Alfan, Alfiru, and Viki Ramadhan. 2022. “Prototype Detektor Gas Dan Monitoring Suhu Berbasis Arduino Uno.” Prosisko: Jurnal Pengembangan Riset Dan Observasi Sistem Komputer 9(2):61–69. doi: 10.30656/prosisko.v9i2.5380.
Puspasari, Fitri-, Imam- Fahrurrozi, Trias Prima Satya, Galih- Setyawan, Muhammad Rifqi Al Fauzan, and Estu Muhammad Dwi Admoko. 2019. “Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian.” Jurnal Fisika Dan Aplikasinya 15(2):36. doi: 10.12962/j24604682.v15i2.4393.
Saleh, Agus, and Deden Ahmad Muhammad. 2020. “Analisis Dan Perancangan Rangka Mesin Pemotong Kentang Otomatis.” 14(2):153–58.
Saparin, Saparin, Yudi Setiawan, Edi Irwan, and Eka Sari Wijianti. 2021. “Rancang Bangun Mesin Pemotong Kentang Berbentuk Stick.” Machine : Jurnal Teknik Mesin 7(1):25–29. doi: 10.33019/jm.v7i2.2309.
Sitohang, Ely P., Dringhuzen J. Mamahit, and Novi S. Tulung. 2018. “Rancang Bangun Catu Daya DC Menggunakan Mikrokontroler ATmega 8535.” Jurnal Teknik Elektro Dan Komputer 7(2):135–42.
Utami, Fatimah Ratna, Munawar Agus Riyadi, and Yuli Christyono. 2020. “Perancangan Catu Daya Arus Searah Keluaran Ganda Sebagai Penggerak Robot Lengan Artikulasi.” Transient: Jurnal Ilmiah Teknik Elektro 9(3):418–27. doi: 10.14710/transient.v9i3.418-427.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Aminah Cendrakasih, Irma Salamah, Abdul Halim Rakhman
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Teknologi Sistem Informasi dan Aplikasi have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, Jurnal Teknologi Sistem Informasi dan Aplikasi recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License
YOU ARE FREE TO:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms
_2020_-_7(2)_2024_-_Thumbnail.png)
