Annealing Effect on Improving the Mechanical Properties of Zirconium Based Biomaterials with the Addition of Yttrium Elements for Bone Plate Application
DOI:
https://doi.org/10.32493/pjte.v8i1.43200Keywords:
Biomaterials, Zirconium Based, Mechanical Properties, Annealing, Micro SpecimensAbstract
To improve the mechanical properties of biomaterials with zirconium-based alloys, especially on ductility, an annealing process was carried out. The process was carried out at a temperature of 800 oC and holding time for 3 hours in a vacuum chamber which was flowed by high purity argon gas. The composition of the alloy used in this study was Zr6Mo4TixY (x= 0, 1 and 3 %wt). Microstructure observations were carried out using microscope optic and Scanning Electron Microscopy (SEM) and mechanical properties observation using tensile testing. In this study, micro-sized specimens were used and followed the ASTM E8-04 standard with a surface roughness of 1µm. The results showed an increase in the tensile strength value after annealing process and decrease the modulus elasticity. In addition, the grain boundaries of the alloy are getting smaller, this shows the effect of annealing on changes in the properties of the material.
References
[1] A. Moztarzadeh, “Biocompatibility of Implantable Materials Focused on Titanium Dental Implants,” Charles University, 2017. [Online]. Available: https://api.semanticscholar.org/CorpusID:139931756
[2] M. C. Tanzi, S. Farè, and G. Candiani, “Chapter 4 - Biomaterials and Applications,” M. C. Tanzi, S. Farè, and G. B. T.-F. of B. E. Candiani, Eds., Academic Press, 2019, pp. 199–287. doi: https://doi.org/10.1016/B978-0-08-101034-1.00004-9.
[3] S. S. Sidhu, H. Singh, and M. A.-H. Gepreel, “A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials,” Mater. Sci. Eng. C, vol. 121, p. 111661, 2021, doi: https://doi.org/10.1016/j.msec.2020.111661.
[4] S. Singh and S. Ramakrishna, “Biomedical applications of additive manufacturing: Present and future,” Curr. Opin. Biomed. Eng., vol. 2, pp. 105–115, 2017, doi: https://doi.org/10.1016/j.cobme.2017.05.006.
[5] N. Eliaz, “Corrosion of Metallic Biomaterials: A Review,” Materials, vol. 12, no. 3. 2019. doi: 10.3390/ma12030407.
[6] C. Li, Y. Zhan, and W. Jiang, “Zr–Si biomaterials with high strength and low elastic modulus,” Mater. Des., vol. 32, no. 8, pp. 4598–4602, 2011, doi: https://doi.org/10.1016/j.matdes.2011.03.072.
[7] Suyalatu, R. Kondo, Y. Tsutsumi, H. Doi, N. Nomura, and T. Hanawa, “Effects of phase constitution on magnetic susceptibility and mechanical properties of Zr-rich Zr–Mo alloys,” Acta Biomater., vol. 7, no. 12, pp. 4259–4266, 2011, doi: https://doi.org/10.1016/j.actbio.2011.07.005.
[8] N. Nomura et al., “Effects of Phase Constitution of Zr-Nb Alloys on Their Magnetic Susceptibilities,” Mater. Trans., vol. 50, no. 10, pp. 2466–2472, 2009, doi: 10.2320/matertrans.M2009187.
[9] Suyalatu et al., “Microstructure and magnetic susceptibility of as-cast Zr–Mo alloys,” Acta Biomater., vol. 6, no. 3, pp. 1033–1038, 2010, doi: https://doi.org/10.1016/j.actbio.2009.09.013.
[10] S. Guo et al., “A metastable β-type Zr-4Mo-4Sn alloy with low cost, low Young’s modulus and low magnetic susceptibility for biomedical applications,” J. Alloys Compd., vol. 754, pp. 232–237, 2018, doi: https://doi.org/10.1016/j.jallcom.2018.04.279.
[11] S. Guo et al., “A novel metastable β-type Zr-12Nb-4Sn alloy with low Young’s modulus and low magnetic susceptibility,” J. Alloys Compd., vol. 745, pp. 234–239, 2018, doi: https://doi.org/10.1016/j.jallcom.2018.02.088.
[12] L. Nie, Y. Zhan, H. Liu, and C. Tang, “Novel β-type Zr–Mo–Ti alloys for biological hard tissue replacements,” Mater. Des., vol. 53, pp. 8–12, 2014, doi: https://doi.org/10.1016/j.matdes.2013.07.008.
[13] P. Chui, “Near β-type Zr-Nb-Ti biomedical alloys with high strength and low modulus,” Vacuum, vol. 143, pp. 54–58, 2017, doi: https://doi.org/10.1016/j.vacuum.2017.05.039.
[14] L. Huang et al., “Bio-corrosion study on zirconium-based bulk-metallic glasses,” Intermetallics, vol. 17, no. 4, pp. 195–199, 2009, doi: https://doi.org/10.1016/j.intermet.2008.07.020.
[15] K. Zhou, Y. Liu, S. Pang, and T. Zhang, “Formation and properties of centimeter-size Zr–Ti–Cu–Al–Y bulk metallic glasses as potential biomaterials,” J. Alloys Compd., vol. 656, pp. 389–394, 2016, doi: https://doi.org/10.1016/j.jallcom.2015.09.254.
[16] M. Y. Yao, B. X. Zhou, Q. Li, W. Q. Liu, X. Geng, and Y. P. Lu, “A superior corrosion behavior of Zircaloy-4 in lithiated water at 360°C/18.6MPa by β-quenching,” J. Nucl. Mater., vol. 374, no. 1, pp. 197–203, 2008, doi: https://doi.org/10.1016/j.jnucmat.2007.08.002.
[17] D. Fuloria, N. Kumar, R. Jayaganthan, S. K. Jha, and D. Srivastava, “An investigation of effect of annealing at different temperatures on microstructures and bulk textures development in deformed Zircaloy-4,” Mater. Charact., vol. 129, pp. 217–233, 2017, doi: https://doi.org/10.1016/j.matchar.2017.04.038.
[18] M. I. Jyrkama, G. A. Bickel, and M. D. Pandey, “Statistical analysis and modelling of in-reactor diametral creep of Zr-2.5Nb pressure tubes,” Nucl. Eng. Des., vol. 300, pp. 241–248, 2016, doi: https://doi.org/10.1016/j.nucengdes.2016.01.035.
[19] K. K. Saxena et al., “Hot deformation behavior of Zr-2.5Nb alloy: A comparative study using different materials models,” J. Alloys Compd., vol. 662, pp. 94–101, 2016, doi: https://doi.org/10.1016/j.jallcom.2015.11.183.
[20] J. Kundu, F. Pati, J.-H. Shim, and D.-W. Cho, “10 - Rapid prototyping technology for bone regeneration,” R. B. T.-R. P. of B. Narayan, Ed., Woodhead Publishing, 2014, pp. 254–284. doi: https://doi.org/10.1533/9780857097217.254.
[21] C. V Haden, P. C. Collins, and D. G. Harlow, “Yield Strength Prediction of Titanium Alloys,” JOM, vol. 67, no. 6, pp. 1357–1361, 2015, doi: 10.1007/s11837-015-1436-2.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Muhammad Awwaluddin, Djoko Hadi Prajitno, Tresna P. Soemardi, Sri Hastuty
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
